spencer785
Well-Known Member
- Joined
- July 24, 2008
- Messages
- 457
- Reaction score
- 0
- Year, Model & Trim Level
- 08 EB 4x4 V6
Hi there I just installed led front and rear turn signals from v-leds and have hyper flashing. I'm getting ready to install resistors to fix the hyper flashing but need a little help with one thing. For the front and rear turn signals what color wire is the one I need to tap into to fix hyper flash and bulb out error. I know there is 3 wires in the rear but not sure about the front. I'm pretty sure the black striped wire is ground seems obvious but somebody please correct me if wrong. I have everything sitting in the garage ready to be installed just don't know what wire to tap into. My explorer is an 08 EB if you need to know. Thanks in advance