AFalcon123
New Member
- Joined
- January 17, 2013
- Messages
- 3
- Reaction score
- 0
- City, State
- ATLANTA, GA
- Year, Model & Trim Level
- 1998 Ford Explorer XLT
This rack mod was only for Nissan Xterras but I did a little modification on my Explorer that wasn't hard. You need the following items:
1.Zip-ties
2. 3 foot Linen shelf kit
3.Flat head screw driver
4. duct tape or electrical (i use electrical).
Steps:
1. Pop off the two plastic rivets on each side above the back side windows
2. Thread the zip-ties through the hole
3. place shelving to fit car
4. tape the two shelves together
5. Done
1.Zip-ties
2. 3 foot Linen shelf kit
3.Flat head screw driver
4. duct tape or electrical (i use electrical).
Steps:
1. Pop off the two plastic rivets on each side above the back side windows
2. Thread the zip-ties through the hole
3. place shelving to fit car
4. tape the two shelves together
5. Done