ukdal1
Member
- Joined
- January 18, 2008
- Messages
- 21
- Reaction score
- 0
- City, State
- Lexington, KY
- Year, Model & Trim Level
- 1998 Mercury Mountaineer
Hey guys!
I am going to lower my Mounty and I guess the question I had was is it ok to lower an AWD?
Let me see if I got this right: Lower the front by adjusting the torsion bars and use a shackle and block kit on the back (or do I even need blocks?) and get an alignment. Is that all? Also, I just put on new shocks on the front. They should be ok, right?
When I lowered me 97 Ranger a few years ago I didn't use blocks. We just put the leafs on the bottom of the rear axle and ghetto lowered the front. Thank God I don't have to do that on this one. That Ranger rode like a tank.
I found some good write ups on here but any tips would GREATLY be appreciated. Thanks!
I am going to lower my Mounty and I guess the question I had was is it ok to lower an AWD?
Let me see if I got this right: Lower the front by adjusting the torsion bars and use a shackle and block kit on the back (or do I even need blocks?) and get an alignment. Is that all? Also, I just put on new shocks on the front. They should be ok, right?
When I lowered me 97 Ranger a few years ago I didn't use blocks. We just put the leafs on the bottom of the rear axle and ghetto lowered the front. Thank God I don't have to do that on this one. That Ranger rode like a tank.
I found some good write ups on here but any tips would GREATLY be appreciated. Thanks!