iwannax
Member
- Joined
- May 11, 2010
- Messages
- 41
- Reaction score
- 0
- City, State
- NE Ohio
- Year, Model & Trim Level
- '94 XLT
I recently purchased a 1994 explorer knowing that 4x4 did not work. The light would not come on, so after reading up on this site, I fixed the shift motor bushing, and now the lights come on, all cost me $0
But 4x4 still doesn't work and then I did the test for blown hubs by engaging 4x4 and driving 20' or so and jacking the tire up and trying to turn the wheel, the wheel kept turning so the hubs didnt engage.
So now I'm converting to manual hubs and after reading the threads on it, I'm pretty comfortable with it, but I just want to make sure these are the right parts:
Dana 44 Spindle Nut Kit 28068X (2x)
Warn 29071 Standard Manual Hub Kit
Is there anything else I need?
Thanks
But 4x4 still doesn't work and then I did the test for blown hubs by engaging 4x4 and driving 20' or so and jacking the tire up and trying to turn the wheel, the wheel kept turning so the hubs didnt engage.
So now I'm converting to manual hubs and after reading the threads on it, I'm pretty comfortable with it, but I just want to make sure these are the right parts:
Dana 44 Spindle Nut Kit 28068X (2x)
Warn 29071 Standard Manual Hub Kit
Is there anything else I need?
Thanks