My $5 discos | Ford Explorer - Ford Ranger Forums - Serious Explorations
  • Register Today It's free!

My $5 discos

Status
Not open for further replies.

cgriffin_5139

Explorer Addict
Joined
October 11, 2005
Messages
3,503
Reaction score
0
Well I read all the posts concerning sway bar quick disconnects here's mine.

Quick Sway Bar Discos for Rear 2nd Gen Explorers

Parts List under $5
edit
1. 2 7/16’’ x 2 1/2’’ ajustable clevis pins
2. 2 pull pins (same size as the hole in the clevis pin)
3. 8 7/16’’ washers
4 1/2'' washers


Unbolt the links from the sway bar and frame. You will notice the bottom bolt is pressed in. The top has a nut which has a frame clip, take it off. Flip the link over and bolt it in to the frame using the existing hardware. This will be a little of a pain and you need a washer for a spacer being that the bolt is bit to long. After bolt in up the bottom hole should match up as before. Now take your clevis pin, slip on a washer slide it through both the link and the sway bar. Use two or three more washers for spacing and put in the pin. There your done!
 






Mud Bug 94

Explorer Addict
Joined
January 16, 2007
Messages
1,202
Reaction score
2
City, State
Bloomingdale, N J
Year, Model & Trim Level
94 XLT-367k miles
nice
 






Status
Not open for further replies.
Top