wantedps
Member
- Joined
- June 17, 2015
- Messages
- 14
- Reaction score
- 0
- Year, Model & Trim Level
- 2001 Explorer Sport 2dr
Firstly when it was bought it was:
Then i've spent huge amount of $ to fix all the problems including cooling system, breaks, leeking of oil from any place it can leek.
Also replaced the front torsions (found used on the local garage) and added a springs to the back, it start to be a little lifted:
Then i started an anti-rust WAR:
Finally Lifting - 3":
Replaced the fog-lights:
Front hull pads was rusted and weak so they was fully removed and remade from steel:
Radiator was dropped by new steel spacers from the top and bottom mounts was recreated.
Front was painted matte black. Now its a different car)
Thanks to Sogsnakebite for inspiration and help!
To be continued....
Then i've spent huge amount of $ to fix all the problems including cooling system, breaks, leeking of oil from any place it can leek.
Also replaced the front torsions (found used on the local garage) and added a springs to the back, it start to be a little lifted:
Then i started an anti-rust WAR:
Finally Lifting - 3":
Replaced the fog-lights:
Front hull pads was rusted and weak so they was fully removed and remade from steel:
Radiator was dropped by new steel spacers from the top and bottom mounts was recreated.
Front was painted matte black. Now its a different car)
Thanks to Sogsnakebite for inspiration and help!
To be continued....