My latest project: 1970 Dodge Dart 512 C.I. Bracket Racer | Page 27 | Ford Explorer Forums

  • Register Today It's free!

My latest project: 1970 Dodge Dart 512 C.I. Bracket Racer

Some of you may remember that I used to have a 1972 Dodge Dart which I drag raced.

DSC_0322.jpg


Well, I got the itch to get back into racing:burnout: Our new house is only 3 miles from the Speedworld racetrack and I can faintly hear them running the cars from our house. It was just too much for me to bare;) I haven't been doing much in the way of local fourwheeling, so I thought drag racing would give me something to do on the weekends.

A couple weeks ago I bought a 1970 Dodge Dart off of E-bay. The car was located in New Jersey, a mere 2500 miles from home:eek: I decided this was the right car for me mainly because I really needed to get out of the house on my own for a couple weeks and this was just the excuse I needed;)

The car is going to be stripped and repainted. It will get new quarter panels, at least one rocker, one floorpan, new door hinges, fiberglass hood, bumpers, and most likely trunk lid as well.

The new color will most likely be orange, but it just may end up being red, like my old one. Plans for it include a 650HP, 512 CI, big block Mopar and an automatic transmission. I'm just not sure if it will be from BB or SB or whether or not it will even be a Mopar:eek: I plan on ditching the torsion bar front suspension for an aftermarket K member which gives you rack and pinion steering, upgraded brakes, and the choice of coilover shocks or airbag suspension.

The rear end in the car right now is a trussed Mopar 8 3/4", with a three link suspension and coilovers.



DSC_0326.jpg


DSC_0328.jpg


DSC_0333.jpg


DSC_0374.jpg


DSC_0380.jpg


DSC_0403.jpg


DSC_0404.jpg


DSC_0407.jpg


DSC_0411.jpg


DSC_0412.jpg
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





...I am sitting here drooling too...:D

...That is some interesting info on the Red color...

...Did you know in the old days that barns were painted red because it was the cheapest to make and easily made available?
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





I'm in Mesa right now meeting up with offroadkc. Send me your address and I'll stop by for a bit.
Posted via Mobile Device
 






Oh, forgot to mention that red is one of, if not the most expensive paint because of the toners that are used. I know it's been that way since I had my first Red dart.

Same with powder coat. The difference is at least 20% in most cases.
 






Robert, it was great to see you last night. Thanks for stopping by:chug:
 






It was good to see you guys. The dart is coming along real good and its good to see Clyde getting a good home. can't wait to see him after he gets more comfortable and personable.
Posted via Mobile Device
 






Paint the new year red!!!

Woo hoo!! Finally have some color on a few parts!!
DSC_2332.jpg
 






woweee nice Rick!!

way to cold here for painting parts, heck its too cold to think about parts

= you lucky SOB!!! I want to paint my front clip so bad!!
 






Pow in your face red!!!!!

Nice. That car is going to look real good Rick.


:notworthy:notworthy

That shop looks warm. I would gladly trade this stuff for the worry of my beverage melting it's ice.
 






is that a big hole in your garage door?
 






is that a big hole in your garage door?

I "think" that is a hole for the swamp cooler.. At lest I "think" I remember Rick running a swamp in there..

~Mark
 






is that a big hole in your garage door?

On the bottom left of the big door there is a vent installed through the door. What you see in the photo is a piece of aluminized insulation covering the vent.
 






It's about 70 out today. I have a 220v heater in the garage to get the temp to 75 for spraying.
 












I thought somebody was going to do the painting for you?
 






Couldn't wait:D

These parts were finished and begging for paint. Now if the clear goes on as well as the paint we'll be set. Clear goes on tomorrow morning.
 






You're shooting this yourself, right??
 






Someone else will be shooting the body. I'm too much of a newb at this to attempt such a large area at once.
 






Clear went on really well. There are three nice coats on the parts. The color looks as rich and deep in person as it does in the photo!:chug:
DSC_2334.jpg

DSC_2335.jpg
 






BTW, color balance is a bit off because of the mixed lighting in the garage. There is a combination of halogen and fluorescent going on which screws with the actual color.
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Rick I thought this was a PG13 web site, to be family friendly.

All I'm seeing in the pictures is a bunch of ****!!!!! :D



And we all know how much I like **** :p:


That's as awesome as the red hot panty dropped Lori's driving.







Jeff - :navajo:







excuse me while I take 15min
 






Back
Top