Need Help With Remote Starter

[dandino]

Ok I just bought the 5704v viper alarm remote starter. My question is which of these don't I need. I have an 03 explorer xlt. Thanks in advance.

H2/1 PINK/WHITE (-) 200mA IGNITION/FLEX RELAY CONTROL OUTPUT
H2/2 BLACK/WHITE (-) NEUTRAL SAFETY INPUT
H2/3 BLUE/WHITE (-) 200mA 2ND STATUS /REAR DEFOGGER OUTPUT
H2/4 GREEN/BLACK (-) 200mA OEM ALARM DISARM OUTPUT
H2/5 RED/WHITE (-) 200mA TRUNK RELEASE OUTPUT H2/6 GREEN (-) DOOR TRIGGER INPUT (N/C* OR N/O) H2/7 BLACK/YELLOW (-) 200mA DOME LIGHT SUPERVISION OUTPUT
H2/8 BROWN/BLACK (-) 200mA HORN HONK OUTPUT H2/9 DARK BLUE (-) 200mA STATUS OUTPUT
H2/10 PINK (-) 200mA IGNITION 1 OUTPUT
H2/11 WHITE/BLACK (-) 200mA AUX 3 OUTPUT
H2/12 VIOLET (+) DOOR TRIGGER INPUT
H2/13 WHITE/VIOLET (-) 200mA AUX 1 OUTPUT
H2/14 VIOLET/BLACK (-) 200mA AUX 2 OUTPUT
H2/15 ORANGE/BLACK (-) 200mA AUX 4 OUTPUT
H2/16 BROWN (+) BRAKE SHUTDOWN INPUT
H2/17 GREY (-) HOOD PIN INPUT (N/C OR N/O)
H2/18 VIOLET/YELLOW (-) 200mA STARTER OUTPUT H2/19 BLUE (-) TRUNK PIN/ INSTANT TRIGGER INPUT (N/C OR N/O)
H2/20 GREY/BLACK (-) DIESEL WAIT TO START INPUT H2/21 WHITE/BLUE (-) REMOTE START/ TURBO TIMER ACTIVATION INPUT
H2/22 ORANGE (-) 200mA ACCESSORY OUTPUT
H2/23 VIOLET/WHITE TACHOMETER INPUT
H2/24 GREEN/WHITE (-) 200mA OEM ALARM ARM OUTPUT

 

[2steptalon]

Its not hard but really time consuming if you've never done it

My 02 came with a alarm/remote start but needs a bypass since its a keychipped key.

I purchased this from ebay 33 bucks. I've yet to install

http://www.xpresskit.com/product.aspx?productid=471

http://www.the12volt.com/installbay/forum_postsm.asp?TID=118210

http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp