Jim Jermain
Active Member
- Joined
- February 20, 2006
- Messages
- 73
- Reaction score
- 0
- City, State
- Madison, WI
- Year, Model & Trim Level
- 00 XLS
I replaced the heads on my '00 4.0 OHV. I now am getting oil on the #3 spark plug base and threads and I am going through oil like crazy. Before I replaced the heads it didn't use any oil. Now it's going through roughly a quart every 100 miles. There are no visible leaks, no sign of oil in the coolant and I'm not getting any blue smoke or smell of burning oil.
I am pulling my hair out. I've got to be burning it but I just don't understand how the new heads are causing it. I don't get any smoke at start up after the car sits overnight - short of the typical condensation given the cold weather. I don't know if somehow the oil ring on the #3 cylinder is somehow sticking. I checked the compression and its 150 lbs. I did jut try adding SeaFoam to the oil over the weekend.
I really appreciate any thoughts.
Thanks!!!
Jim
I am pulling my hair out. I've got to be burning it but I just don't understand how the new heads are causing it. I don't get any smoke at start up after the car sits overnight - short of the typical condensation given the cold weather. I don't know if somehow the oil ring on the #3 cylinder is somehow sticking. I checked the compression and its 150 lbs. I did jut try adding SeaFoam to the oil over the weekend.
I really appreciate any thoughts.
Thanks!!!
Jim