PJC1
Member
- Joined
- February 5, 2020
- Messages
- 12
- Reaction score
- 1
- City, State
- PA
- Year, Model & Trim Level
- 2003 Lincoln Aviator AWD
I got the front heat working good, now to tackle the rear.
I replaced the rear blend door actuator which is now working properly. The coolant lines to the rear core are not getting hot. I thought one of the lines was slightly warm. Is there a separate heater control valve for the rear? Maybe the core is clogged?
I replaced the rear blend door actuator which is now working properly. The coolant lines to the rear core are not getting hot. I thought one of the lines was slightly warm. Is there a separate heater control valve for the rear? Maybe the core is clogged?