majdi
Member
- Joined
- May 30, 2009
- Messages
- 40
- Reaction score
- 0
- City, State
- kitchener, ontario
- Year, Model & Trim Level
- 94 ranger
so i swaped my ford ranger 1994 4.L automatic engine with an Aerostar engine, engine had 160k on it, before it was pulled out it ran fine. I did the swap, had to change the complete harness, and the intake manifold and the exhaust.
I got the engine in and everything is good , but the engine wont fire,
there is no spark , there is no fuel( fuel pump is not turning on)
already checked : wiring, fuses , coil plug has power , firing order is good
the crank position sensor has no power when the engine is turning over
there seems to have been an alarm on the truck from before, i unplugged that black box for the alarm, but still no luck.
any suggestion guys ? do you think it could be the old alarm ?
I got the engine in and everything is good , but the engine wont fire,
there is no spark , there is no fuel( fuel pump is not turning on)
already checked : wiring, fuses , coil plug has power , firing order is good
the crank position sensor has no power when the engine is turning over
there seems to have been an alarm on the truck from before, i unplugged that black box for the alarm, but still no luck.
any suggestion guys ? do you think it could be the old alarm ?