bluestream1
Well-Known Member
- Joined
- November 9, 2005
- Messages
- 950
- Reaction score
- 3
- City, State
- Waterloo Ontario
- Year, Model & Trim Level
- 2000 XLT 4.0 SOHC 4X4
This truck all of a sudden no start situation. Dash Lights come on. "Theft" light flashes. Battery is good, swapped out starter relay. same problem. Checked voltage at pin 85 of starter relay and only getting 3.85 Volts. This should be 12V right?
Checked out this link:
http://www.explorerforum.com/forums...arter-no-crank-procedure.264733/#post-2356171
Any ideas? Should I jumper starter solenoid?
Checked out this link:
http://www.explorerforum.com/forums...arter-no-crank-procedure.264733/#post-2356171
Any ideas? Should I jumper starter solenoid?