Overspray on rear wheel wells

[explorersport23]

So I was attacking the ever annoying rust on my rear wheel wells recently. I knocked the rust off, cut up above the highest rust point, and then sanded down the fender. I then used bondo to make the fender look as normal as usual and sanded that down to an even point. I hit it with black spray paint that I got at autozone and then topped it with a clear coat paint that I also got at autozone. There was a little overspray from both paints and now I'm trying to figure out how to get this overspray off. It has been like this for a few days and it just looks ugly. Let me know what you guys think, any suggestion helps!

 

[vroomzoomboom]

you can try claybar as long as its a mist, and not heavy over spray

 

[toypaseo]

I have removed minor overspray using Meguiar's paste Cleaner Wax. Took some elbow grease, but worked fine. Less worries about going through the clearcoat than using rubbing or polishing compounds.

 

[Flash]

If it needs more than the first 2 suggestions give it a wet sand with 800 or 1000 grit the polish.