michael loibl
Well-Known Member
- Joined
- February 9, 2007
- Messages
- 734
- Reaction score
- 74
- City, State
- maywood, new jersey
- Year, Model & Trim Level
- 2006 EB V6 & 2020 XLT
I searched thru a few old posts on this topic and hoping someone has some additional information.
2006 4.0 liter V6
From what I understand, the EGR valve has a map sensor built into it, thus needing replacement as an assembly.
I checked the electrical connection, and the wire insulation for the first few inches and it looked good.
The 2 bolts holding the EGR to the plastic intake seem rusted tight to the point that I fear cracking the plastic. I wire brushed the exposed threads and soaked in penetrating oil.
Anyone else ever deal with this? Any tips?
2006 4.0 liter V6
From what I understand, the EGR valve has a map sensor built into it, thus needing replacement as an assembly.
I checked the electrical connection, and the wire insulation for the first few inches and it looked good.
The 2 bolts holding the EGR to the plastic intake seem rusted tight to the point that I fear cracking the plastic. I wire brushed the exposed threads and soaked in penetrating oil.
Anyone else ever deal with this? Any tips?
