Permanent Fuel Pressure Sensor connection

[MuscleJunkie]

Going to be installing a permenant fuel pressure sensor on my 2000 5.0 Liter with return less fuel system. Anybody have some photos and part numbers or links of what sort of connection or adapter I need to connect the sensor to the fuel lines and where it connects at?

Thanks

 

[donalds]

I'd use the test port on the rail with a brass fitting

 

[MuscleJunkie]

I'd use the test port on the rail with a brass fitting

Where is the test port on the rail for the 5 L engine? Sorry it’s not something I’m familiar with. Do you ever you have a recommendation of what sort of fitting?

 

[donalds]

Here is how I did it

Supercharger install 9+lb boost! Full build

I think you could do damage over time if you ran without a thermostat in cold weather. It is always good to allow the engine to get up to temp before hammering on it. Yes there is a Function to set when the ECT is warm enough to trigger Open Loop fuel. This summer, I set my tune to allow Open...

www.explorerforum.com

I don't know where the port is on a 5.0

 

[MuscleJunkie]

Here is how I did it

Supercharger install 9+lb boost! Full build

I think you could do damage over time if you ran without a thermostat in cold weather. It is always good to allow the engine to get up to temp before hammering on it. Yes there is a Function to set when the ECT is warm enough to trigger Open Loop fuel. This summer, I set my tune to allow Open...

www.explorerforum.com

View attachment 425738

I don't know where the port is on a 5.0

Is that on the V6? I can't remember if I saw a test port or where on my V8. What sort of fitting did you use?

 

[donalds]

Fuel Rail Thread Adapter for Ford Schrader Valve

GlowShift Fuel Rail Adapter Thread Adapters for Ford 5.0 Vehicles Make It Easy to Install a Fuel Pressure Sensor Without Major Vehicle Modifications.

www.glowshiftdirect.com

Next time click the link I provided but here it is again