hvac man
Elite Explorer
- Joined
- November 30, 2002
- Messages
- 1,137
- Reaction score
- 0
- City, State
- Rifle, CO
- Year, Model & Trim Level
- 93 Sport
I have been working on my high steer this week and was trying to find a pitman arm that was totaly flat, but to my surprise I couldn't find a company that made one for the ford explorer/ ranger. I posted a 911 thread here and got an answer back saying that all ford pitman arms share the same spline count at the gear box. I went looking and found several good options. what I found was:
97+ IFS F150's and 99'+ superduties have flat pitman arms.
95'+ E250, E350 vans have a small drop. about half of the explorer stock arm.
There are probably a lot of others that will work too but I thought I would share what I found and used.
97+ IFS F150's and 99'+ superduties have flat pitman arms.
95'+ E250, E350 vans have a small drop. about half of the explorer stock arm.
There are probably a lot of others that will work too but I thought I would share what I found and used.