polyurethane body lifts?

[95offroadx]

is there any polyurethane body lifts/body bushings out there for the 1st gen? i know jeep sells 1"-2" lift polyurethane body bushings. or can i just get 10 1.5" lift body mounts?

 

[sn0border88]

as long as they are the right dimensions, you could grab a big long stick of it and make your own.

 

[rcmann]

You could just buy a 2 inch body lift, and run large washers. You will have to buy new bolts/nuts and washers for them, as you'll probably snap off a few bolts, and the nuts on these things stock are sqare, and are welded to the bottom of the bushing retainer. This will probably give you overall 1 inch of lift, so gaps will be minimal.

 

[95offroadx]

what are the dimensions? i really want to add a little more lift, even it out a little maybe like 1.75" front 1.5" rear...

 

[sn0border88]

go out and look at your body mounts....