Power source for power seat install?

[429CJ-3X2]

I'm preparing to install power seats from a '98 Explorer in my '02 Sport Trac which currently doesn't have power seats. The seats are not heated, so I just need to run a hot wire and a ground. I'm looking for recommendations as to a power source for the seats.

 

[JuBean]

It is very easy to run a dedicated hot line down the drivers side from the distribution block in the engine compartment - just make sure it is fused or even add an inline fuse
That is how I set them up in my old ranger and grounded through one of the seat bolts into the body

 

[429CJ-3X2]

I'm thinking rerouting the wires to the cigarette lighter is an option too. Already uses a 20 amp fuse, and with the power port, I'll never use it anyway.