KEN's Exploder
Active Member
- Joined
- October 11, 2015
- Messages
- 77
- Reaction score
- 8
- City, State
- Raleigh, NC
- Year, Model & Trim Level
- 1994 4X4 XLT
Found this post from 85Dave and he saved me a ton of money. Having my adult beverage as I type right now. I completed this for three windows in my 1994 Explorer in about 5 hours. Order the help packs for the nylon bushings on Amazon for about $8.00 a piece as well as ordered a package of the black clips to replace the door panels because I knew I was missing a few. I was a bit **** in cleaning out the housing where the worm gear is located on the motor. Everyone of them was totally full of broken bushings. I took pictures but not sure how to load them. All was well, at least I thought as I took the first motor apart to clean out the debris. Getting it back together was a pain and time consuming. I must have put the brushes in backwards or connected a wire up backwards because this right rear window now works opposite from the controls. I'll go in another time to reverse some wires to see if that will work. anyway at least I have windows that work with out assisting them by hand. It has been a few years this way. Yes, I'm a cheap *******!