Pre collision assist not available explorer 2020 limited ecoboost

[Jaybee]

Hi Guys.. after changing my bumper due to an accident, I started getting the error message and my cruise control stopped working. After a while it starts working again, and the cycle continues.
I checked the adaptive cruise control radar (but didn't remove the bumber) and it felt loose when I touched it.
Has anyone experienced this?

 

[peterk9]

Welcome to the Forum.
The radar unit or its mounting may have sustained some minor damage. I think the first step would be to make sure it is tight and doesn't move around. Then go from there if the issue persists.

Peter

 

[Jaybee]

Welcome to the Forum.
The radar unit or its mounting may have sustained some minor damage. I think the first step would be to make sure it is tight and doesn't move around. Then go from there if the issue persists.

Peter

Thanks a bunch pal. I checked and realised the mountain is broken, I've placed an order for a replacement.

 

[Forddealz]

Thanks a bunch pal. I checked and realised the mountain is broken, I've placed an order for a replacement.

Isn't the part covered by warranty?

Lane keeping assist were the car steers itself in lane stopped working. I cannot turn it on. Adaptive cruse control works. I will have to take it to dealership.

 

[Dale5403]

Isn't the part covered by warranty?

Lane keeping assist were the car steers itself in lane stopped working. I cannot turn it on. Adaptive cruse control works. I will have to take it to dealership.

In post 1 he stated is was in an accident.

 

[Forddealz]

In post 1 he stated is was in an accident.

I have not washed my car in a few month. I decided to clean my front bumper and front sensors and now everything works as it should.