tekgarage
Member
- Joined
- July 3, 2009
- Messages
- 22
- Reaction score
- 0
- City, State
- Glendale, California
- Year, Model & Trim Level
- 2002 Explorer Limited
Replaced my cluster a few months back with one I found on eBay when my original cluster went out.
I have an 02 limited with the digital message center. I did notice that the 02s where made in two batches one with an earlier 02 date and one with a later. Anyway, my truck was in the earlier batch if that helps.
Problem now is, after the swap the odometer does not display the current mileage correctly, it is short by a few thousand. Didn't bother me at first, but now thinking down the line, I would like to have it fixed.
Is there a way I can pull the mileage off the PCM or any other location so that I can calibrate my cluster? Or is the mileage only stored in the cluster for this vehicle?
I have an 02 limited with the digital message center. I did notice that the 02s where made in two batches one with an earlier 02 date and one with a later. Anyway, my truck was in the earlier batch if that helps.
Problem now is, after the swap the odometer does not display the current mileage correctly, it is short by a few thousand. Didn't bother me at first, but now thinking down the line, I would like to have it fixed.
Is there a way I can pull the mileage off the PCM or any other location so that I can calibrate my cluster? Or is the mileage only stored in the cluster for this vehicle?