SAS swap is done!!!

[CodePoet]

I used 3.5" backspacing on the rear and 4.5" backspacing on the front so the track width was close to the same.

If that's what you have i'll be in the same ballpark....i'm running 4" back spacing all the way around but I'm replacing the 8.8 with a full width 9"

 

[dkkne]

they stick out a little bit too far dont they? i like how it looks,I take that you will be putting some fender flares on it?

I ordered some pre runner style fenders for the front and I am not going to worry about the rear.

Here is what the fenders are going to look like:

 

[dkkne]

If that's what you have i'll be in the same ballpark....i'm running 4" back spacing all the way around but I'm replacing the 8.8 with a full width 9"

What are you running in the front for an axle?

 

[CodePoet]

d44 from a 79 f150

 

[sn0border88]

My answer to tire size.... I got a 99 sport.

My 1st gen is trailer to trail now, so I said hell with tire width. Thats why i went with a full spool and 5.13's and am switching to a c4 trans.

 

[yostjy]

you need to do a write up on that and share all the details on how u did it so the rest of us can enjoy