Starter relay wired "Plugged" into the starter!

[Chris Harrach]

Problem solved.... There was a small tab on the backside of the plug (Yes, it was a plug) Depressed it and off it came! Once again many thanks for all the help and advice I've recieved from this forums members. in my starter project.

Thanks to all!
Chris

 

[swshawaii]

Years since I've changed a starter. Sounds like a spade type connector, or possibly an eyelet fastened by a nut.

Wiggle the connector side to side and it should release. Can't imagine it being hard wired to the starter solenoid.

http://www.fixya.com/cars/t4416129-changed_solenoid_in_97_ford_explorer

From your original post:

Yep..that push on one can be the problem.Bish to get at with your hand but can be done.