thanks for all the help

[c4m4r0]

i bought my 94 explorer 4 days ago and thx to the site and some help on my posts i have fixed:
1) wheel bearings
2)radius arm bushings (had clunk but no more)
3)egr valve and tube cracked
4)air filter, fuel filter
5)fuel sender unit and fuel pump

glad i did it myself to save the money

only PROBLEM i have left is the CEL for the EGR. After i replaced the EGR tube i got the CEl, had it checked and guy said it was EGR valve, which i beleived cause it was really rusted up. but i still have the CEl after just replacing the valve, what else could it be?
thanks
Jerry

 

[Robb]

Try a search for PFE. It is the sensor that controls the EGR. It throws codes that point to the EGR when it isn't really the EGR.

Robb

 

[dogfriend]

Also, make sure to pull the battery cable off for a little while to clear the EGR code after putting in the new part, if you haven't done that already.