DonM
Explorer Addict
- Joined
- September 4, 2001
- Messages
- 1,056
- Reaction score
- 0
- City, State
- Ocean View, NJ
- Year, Model & Trim Level
- 95 XLT
Originally posted by Billy177
my aunt was having the same prolblem cleaning the computer harness with electrical contact cleaner fixed it
I removed the harness from the computer today. I then sprayed the connectors on the computer and also sprayed the wholes on the harness.
I remembered back last year when I installed the Apten Chip the computer had some gue on the connectors where the harness plugs in. So I cleaned that crap off with the Electrical cleaner.
I guess we will see if this did the trick?
However after I read your post I gave it some thought. If a dirty harness was the culprit the Apten chip would most likely not work, correct? Plus there would be other symtoms I would guess.
Btw, my brother picked up a new IAC. The new IAC fixed the strange idle at a cold start and seemed to take care of the slight lack of accelertaion. But did not take care of the hard start.
Does anyone know why the IAC's on this truck keeps going bad??? It's the third one in three years!!!! There must be something going on with this truck for the IAC to fail so quickly...