cantornikolaos
Active Member
- Joined
- August 2, 2011
- Messages
- 89
- Reaction score
- 5
- Location
- Greenville, SC
- City, State
- Greenville, SC
- Year, Model & Trim Level
- 2000 Explorer Limited 5.0
- Callsign
- BigTime
MY beloved 2000 Limited V8 AWD Explorer took a hit. A forklift driver hit me in the Walmart parking lot and did enough damage to prevent me from taking a trip I've been planning for almost a year. I'm looking at a few different options. I can either spend a $5-10k and get something as nice as what I have, and in the same age range, or I can get something really clapped-out and gross for $1.5k-3k. One vehicle I saw is a 2005 Explorer with a salvage title. It's an SC vehicle, so it's not rusted out. It has some minor cosmetic damage, but has been mostly repaired. There is a little bit of a dent in the hood. It was salvaged because of a minor collision. It's a 2WD V6 XLT model. That means 5R55 and 4.0 SOHC V6. It has 205 k miles. I've always been cautious around those engines, but it runs like a top. It's really quiet. No chain noise and no lifter noise. The oil is due for a change, but it doesn't look terrible. No forbidden glitter. The transmission shifts in and out of Reverse and Drive smoothly. It shifts through all the gears smoothly. It doesn't slam or clunk into reverse, or any other gears. It is quiet. I almost wonder if it and/or the engine have been rebuilt at some point because of how good they run.
If I do get it, my idea is to drive it around while I work on the 2000 Explorer, or while I look for a more long-term and older replacement. I want to be as good to it as I can while I'm driving it and sell it to its next owner with plenty of life still in it. I was not able to find maintenance history on this vehicle online., but it looks pretty good under the hood and I'm impressed with how well it runs and drives. Is it a good bet, or should I steer clear? With good maintenance, can I expect the engine and transmission to last? I'm confident in my 302 and 4R70W in the 2000 Explorer. Would it be a good idea to replace the transmission pan with a trickflow deep pan with a dipstick? I really am not a fan of not having a dipstick. Is it a 5R55S? There is a 5R55W, 5R55N, and 5R55S. I had a Third Gen Explorer in the past and really liked it. I had to rebuild the transmission around 205k miles, but otherwise it was good. I drove it 50k more miles before selling it.
It is being sold at a small father-and-son dealer and they don't have any information about the vehicle's history. Toyota of Greer ran it through an auction and they bought it. I am also interested in seeing if I can get the "salvage" brand taken off, and maybe branded as "rebuilt" or something like that.
If I do get it, my idea is to drive it around while I work on the 2000 Explorer, or while I look for a more long-term and older replacement. I want to be as good to it as I can while I'm driving it and sell it to its next owner with plenty of life still in it. I was not able to find maintenance history on this vehicle online., but it looks pretty good under the hood and I'm impressed with how well it runs and drives. Is it a good bet, or should I steer clear? With good maintenance, can I expect the engine and transmission to last? I'm confident in my 302 and 4R70W in the 2000 Explorer. Would it be a good idea to replace the transmission pan with a trickflow deep pan with a dipstick? I really am not a fan of not having a dipstick. Is it a 5R55S? There is a 5R55W, 5R55N, and 5R55S. I had a Third Gen Explorer in the past and really liked it. I had to rebuild the transmission around 205k miles, but otherwise it was good. I drove it 50k more miles before selling it.
It is being sold at a small father-and-son dealer and they don't have any information about the vehicle's history. Toyota of Greer ran it through an auction and they bought it. I am also interested in seeing if I can get the "salvage" brand taken off, and maybe branded as "rebuilt" or something like that.