Thinking bout a 3.5" Lift

[Arthur]

My lift idea is a little different than a typical explorer lift... This is what I was planning on putting on.

-skyjacker 2" ( 2 inch spring w/ Add-A-Leaf )
-F150 Spacers
-Warrior shackles

*about 3.5" total lift

My only problem is my alignment... I have a 2wd Explorer and I know that I would need axle drop brackets... I found some drop brackets, but they are for 4wd explorers... Will these work with a 2wd Ex?
http://www.suspensionconnection.com/cgi-bin/suscon/20816.html?mv_pc=froogle

 

[pughman]

im almost 100% that that just might work....

still be cheeper to use a body lift, and the 2 inch springs and shackels.

 

[Arthur]

im almost 100% that that just might work....

still be cheeper to use a body lift, and the 2 inch springs and shackels.

100% sure that it might work? haha so is that a yes or a mabye?

 

[pughman]

dont ever rember reading about anyone doing it (not saying they have not), so you would just need to do it and see. might work might not, i dont know, sounds like it should though. ..... im not any help here.....lol....

 

[FROADER]

4wd drop brackets will work for the 2wd.

Seems like you might as well get 4" springs if your going to get the drop brackets.

 

[Arthur]

4wd drop brackets will work for the 2wd.

Seems like you might as well get 4" springs if your going to get the drop brackets.

wouldnt that make the front higher than the back? plus i already have f150 spacers

 

[FROADER]

If you're going for 3.5" of lift, I guess it would put you at about .5" higher in the front. :

 

[Arthur]

how much does the AAL add to the rear?