Tire Carrier

[Terran]

Will a bronco II swing tire carrier fit a 91 EXPLORER? And is there anything special i need to do to make it fit?

 

[Creager]

your best bet is to SEARCH

but yet, i do believe you can mount the BII carrier right on. It should hold a 33" tire just fine. The later BIIs had bigger and better tire carriers on them.

some guys make one that attaches to the bumper out of fear of ripping the metal.

 

[Jason94sport]

The B2 had re-enforcments behind the sheet metal to support it. The X doesn't have that. The mounting points are different because of the different tailgate. You'd have to figure these things out to mount it. Also the B2 could only support a 31" tire max. It can be done, just have to make it fit.

 

[Thelgord]

With a good torch, anything is possable

 

[Terran]

that's what i figured, i found a new OEM kit with supports so i'm going to get taht and make it fit.

 

[bmxking5]

Look up the thread by "BigDakota" (?)...he just put one on his 2nd gen. Lots of good info about the swap in that thread.