4LB2
Member
- Joined
- February 13, 2003
- Messages
- 42
- Reaction score
- 0
- City, State
- San Diego, CA
- Year, Model & Trim Level
- 86 Bronco II
I started to wire up my guage but I have a couple problems. It's a nordskog analog unit btw.
1) It gets power and sweeps to 280. This is obviously wrong. I'm guessing it's the ground. I grounded it on the back of the intake instead of the actual block. Could this be the problem?
2) I tried splicing the power feed into the radio's power feed but for some reason it wont draw power from it yet when I wired up my aux. lights to that same wire it worked...
-James
1) It gets power and sweeps to 280. This is obviously wrong. I'm guessing it's the ground. I grounded it on the back of the intake instead of the actual block. Could this be the problem?
2) I tried splicing the power feed into the radio's power feed but for some reason it wont draw power from it yet when I wired up my aux. lights to that same wire it worked...
-James