Truck of the Week! Johnstone's Sport Trac 1/19/04 | Page 3 | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Truck of the Week! Johnstone's Sport Trac 1/19/04

4107rickh_p4292287.jpg


Well, I've been an Elite member for probably like two years. I guess it's time to put something in the Elite Registry. So here goes...

Engine: Stock 4.0L (245) SOHC SEFI V-6, Home made snorkel kit out of 3" PVC
Transmission: Stock Ford 5R55E 5 -Speed Automatic Overdrive
Transfer Case: Borg Warner 1354 electric shift - Gear Ratio — Low — 2.48:1
Steering: Stock Power, Ford - Rack and Pinion (Includes Steering Cooler) - Ratio 19.1:1 Static
Front Suspension: Ford SLA (Short/Long Arm) Independent Front Suspension, Rancho RS5000's, Torsion Twist.
Rear Suspension: Stock springs relocated over axle with generic spring perches, Rancho RS5000's, WAR153 Warrior Shackles, anti-sway bar removed.
Front Axle: Hybrid Dana 35/Sterling IFS, Powertrax Lock-Right, 4:10 Gears
Rear Axle: Ford 8.8, drum brakes, 4.10 gears, Powertrax Lock-Right
Driveshafts: Front - Stock, Rear - Aluminum from Extended Cab Ranger
Communications: Cobra 75 WX ST 40 Channel CB, Wilson 1000 antenna
Recovery Equipment: 60" Hi-Lift jack, 20' looped end tow strap.
Tires/Wheels: 35x12.50x15 Goodyear Wrangler MT/Rs on 15x10 American Racing AR-767 steel wheels.
Exterior: Performance Accessories 3" body lift. Gloria Zimmerman Rocksliders. Yakima roof rack with spare tire carrier. 60" Hi-Lift jack mounted to roof rack. Hanneman 3" flared fiberglass fenders.
Interior: Leather seats, power moonroof, power rear window.
Audio: Stock CD/AM/FM radio.
Future Mods: SAS, Custom tube bumpers front and rear, a winch, and possible engine swap.


Before Pic
41072001012701.jpg


After Pic
41072003032301.jpg


Purchased 6/30/2000. It was 4th of July weekend, and I took her out for some camping and
minor offroading in Big Bend National Park in 110 degree heat. I put my first scratches on her that weekend.
I was just letting her know how hard she would have to work for me.

I bought her fully loaded. I think the only option I didn't have was the audiophile stereo system and of course the hard tonneau cover wasn't available yet.

Big Bend National Park
410700703051.jpg


I pretty much left her stock in appearance for over a year. Thanks to this website I learned about the KKM performance filter and installed it.

In August of 2001 I made my first appearance modification. I did the Torsion Twist and installed the longer Warrior shackles. I bought the Warrior shackles from Desert Rat Offroad store in Tucson for about $45.00.

After torsion twist and longer rear shackles made by Warrior.
41072001081101.jpg


In January of 2002 I made my first trip to an Explorer4x4.com Meet, Truckhaven Run of 2002.
It was at this offroading event that I really began to realize the limitations of having the longest Explorer on the block.
As Rick and other pointed out to me, my step bars would take a beating out there. On the last day of offroading I nailed one of the step bars so hard that I hit it when I opened my drivers door.

Truckhaven 2002 - Tailgate Party on the Sport Trac!
41072002011901.jpg


On the way home from Truckhaven, we stopped in an offroad shop in El Paso, TX. That's where I ordered the Performance Accessories 3" body lift kit for my truck.
In the middle of February 2002, my wife and I installed the body lift kit. Luckily I had a friend that had heard about another Sport Trac that had installed this kit and he warned me about how close the A/C line will be to the harmonic balancer after the lift is installed. I used some universal muffler bracket material to make sure the A/C line was held down away from the harmonic balancer.

The day after adding a 3" body lift.
41072002021101.jpg


At the end of February 2002 is when I got my 35" x 12.50" Goodyear Wrangler MT/R tires mounted on 15x10 American Racing black steel wheels.

At the middle of March 2002 it was time for the 1st Annual Arizona Meet. We had a great time hanging out with everyone and seeing the Arizona desert. I even had fun rescuing some stranded moto-cross guys.

Arizona Meet - Coke Oven Run
41072002031701.jpg


After that trip I worked on getting a full-size spare tire and a way to mount it on the truck. After purchasing another MT/R and steel wheel for a spare, I ordered a Yakima rack and hardware to mount on the roof and put the spare tire on it.
I also bought a front skidplate for a Ranger. It bolted right up. But, it's mainly for looks. It's too thin to really protect the truck.
Getting ready for the Moab 2002 Meet, I removed some of the grey cladding and did some painting to get rid of the rest of the grey.

Moab 2002 was an awesome experience. Ever since that trip I've been wishing I lived closer to that area. I feel like I beat the crap out of the truck on that trip.

Moab 2002 - Wipeout Hill on 7 Mile Rim Trail - Photo by Rick Horwitz
4107rickh_p4292287.jpg


After Moab, we headed for Nevada to pay a visit with Gloria Zimmerman so that she can spec my frame and make me a set of her rocksliders.

In the middle of June we drove to Louisville, KY for the 1st Annual National Sport Trac Meet

We got to tour the Ford Louisville Assembly Plant where all the Explorers and Mountaineers get assembled. It was pretty cool.

My Sport Trac back at it's birthplace - Ford LAP
41072002062401.jpg


I had a lift and 35" tires, but I still couldn't play with the Big Dawgs on the tough trails.
So it was time to start concentrating on getting lockers to become a big dawg.
For some crazy reason I ordered a locker for the front D35 differential first. I ordered the Powertrax LockRight from Rocky Road Outfitters, www.rocky-road.com, for about $230.00.
It was about at this time that I received my rocksliders from Gloria Zimmerman. So one Sunday, me and my friend Bill proceeded to install the rocksliders and locker in the front differential.
After getting the front differential axle assembly removed from the truck and get the carrier and ring gear removed from the differential, we discovered that one of the side gears for the locker was wrong. I ended up returning the locker to Rocky Road Outfitters. They in turn tried to contact Powertrax to verify that the side gear was wrong. Bad timing, Powertrax had just been bought by Richmond Gear and were in the processing of moving everything, so they couldn't respond to Rocky Road Outfitters. I knew it was wrong, but they had to follow their procedures. Finally, they were able to verify with Powertrax that is was wrong. But it would be sometime before they could get me another D35 LockRight model. So I asked them to refund my money and I called Randy's Ring and Pinion who had one in stock for about $5-$10 more than Rocky Road Outfitter's price. I ordered it from Randy's Ring and Pinion and got it installed the first weekend of October 2002.

Powertrax LockRight installed in my D35/IFS differential
4107powertrax_lockright_front_d35.jpg


The next weekend I had organized an Offroad Run in Las Cruces, NM. I had contacted the Las cruces Four Wheel Drive Club to show us one of their trails. Homer, from LCFWDC got some of their members together and Becker69 and Marty196 from Explorer4x4.com showed up. I had also gotten a local Las Cruces member from to show up. We did the Broad Canyon Trail. It was a pretty tough trail. Marty196 and Becker69 and the other Sport Trac owner wisely chose not to try and drag the trucks through this trail. This is were I learned to listen to he power steering pump. When it's been whining for a few minutes, it's time to back off and try something different. But, I didn't and I bent a tierod. Luckily we were able to bend it back into place without it breaking.

My bent tierod
410710120123.jpg
410710120125.jpg


Broad Canyon Trail, Las Cruces, NM
410710120107.jpg
410710120117.jpg



After getting a new tierod installed and getting a new CV half-axle, it was time to get a rear locker installed. I called Rocky Road Outfitters again and ordered the Powertrax LockRight for the rear 8.8 differential.
It cost about $240. With my friend Bill's help again we got this installed on 12/22/2002. Plenty of time to be ready to run as a big dawg at Truckhaven 2003.

Powertrax LockRight Installed in my rear 8.8
4107powertrax_lockright_rear_8_8.jpg


So, January 2003 rolls around and it's time for Truckhaven 2003. I had a great time running with the Big Dawgs.
Truckhaven may not be the most scenic place to be, but it's one of the funnest meets to go to.
On the first night there, I flexed the rear wheels so much that I caught the fuel filler assembly with one and ripped it up. The next day, Matt(Rockranger) and Tom Davis helped me fix my fuel filler to make it usable again.
On the last day of offroading here, the stress of all the tight turns finally took it's toll on one of my CV axles. The passenger side one broke on the waterfall obstacle.

Truckhaven 2003 - Photos by Rick Horwitz
DSCF2963.jpg

DSCF3019.jpg


Broke CV axle at Truckhaven 2003
410701190168.jpg


On my way to Truckhaven 2003, I made a quick stop to pick up the Hannemann Fiberglass Flared Fenders that I bought used off a guy in Southern California. In February 2003, I installed the fenders.

After installing the Hannemann Fiberglass Fenders
41072003022701.jpg


Money has been tighter in 2003, so I did most of my offroading in Texas. It was good to see more of the Texas wilderness.

We went once to Coletto Creek near Victoria, TX.
Three times to the Slabs near Kingsland, TX.
Twice to Devil's Den in San Antonio, TX.
Twice to Shiloh Ridge near Alto, TX.
And twice to Barnwell Mountain, near Gilmer, TX.

The Slabs near Kingsland, TX
410706210002_half-med.jpg

4107slabs_91924.jpg
4107slabs_91915.jpg


Barnwell Mountain Recreation Area near Gilmer, TX
410705170079-med.jpg


Devil's Den in San Antonio, TX
4107devils_den_91750.jpg

4107devils_den_91747.jpg


Shiloh Ridge near Alto, TX
410703010148.jpg

410703010194.jpg
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





*Never realized how unbelievably awesome a lifted ST could look til John asked her to draw a mini for him*

Congrats, Mr.-formerly-known-as-Aquaman! You definitely the coolest Sporty I have ever seen, hands down :cool: If love is in the details, than you must be crazy about that big beast, John!
 

Attachments

  • johnstone.jpg
    johnstone.jpg
    72.7 KB · Views: 3,606



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





looks great. best looking sport trac i have ever seen
 






hey i was wondering, did u get the:
28 spline 3/4" shaft
31 spline 3/4" shaft
or the
31 spline 7/8" shaft

for your lockers?
 






also i was wondering what kind and wherd u get ur front skids and sliders???? Thanks man!
 






SportTracDude02 said:
hey i was wondering, did u get the:
28 spline 3/4" shaft
31 spline 3/4" shaft
or the
31 spline 7/8" shaft

for your lockers?
I can't tell you what the shaft diameter is, trying doing a search on the site. But, I do know all Explorer axles shafts are 31 splines. And if you are ordering a locker from Powertrax they know what size the shaft is already.

SportTracDude02 said:
also i was wondering what kind and wherd u get ur front skids and sliders???? Thanks man!
The front skid plate is a Frod Ranger part. But, it's for looks only. Don't rely on it for protection. I'll be building a real skid plate soon. The sliders were made by a woman that used to be on this website. But, she has dissappeared. Your best bet is just go to a local 4x4 shop to get some made.
 












Thats an awesome Sport Trac. Did you make those front fenders or did you buy them.
 






Slush Box said:
Thats an awesome Sport Trac. Did you make those front fenders or did you buy them.
Exterior: Performance Accessories 3" body lift. Gloria Zimmerman Rocksliders. Yakima roof rack with spare tire carrier. 60" Hi-Lift jack mounted to roof rack. Hanneman 3" flared fiberglass fenders.
http://hannemannfiberglass.com/
 






my new toy.

2002 Sport Trac

Mods/Specs
SOHC V6
4.10 Gears (open) Need some ARB lockers soon!
3" Body lift
Torsion bar twist (about 1 inch)
33x12x15 ProComp Xterrian Tires
15x8 3.75BS ProComp Wheels
M8000 Winch
Hidden Hitch Front hitch (flipped upside down and mounted on top of the frame rails for added height).


38933462_l.jpg


<p>

39790165_l.jpg


<p>

39792012_l.jpg


Cleveland OH
Branden
 






Nice ST Branden. I always wondered if you could take one of those front hitches and flip it over. Thanks for the info. :thumbsup:
 






WOW, that looks DAMN good weewee :thumbsup:
 












Really nice truck! I was originally looking for an ST when I found, fell in love with, and got a terrific deal on my X Limited. If not for that, I would probably be following in your footsteps, even though I doubt that I would be nearly as successful in making it look so good.
 






alright im in the middle of lifting my truck and ive got the spindles made the shackles but my rear end is saggin how do i get it up? also im at about 90,000 miles and starting to worry about the timing belt or chain so i went to the parts house and they could find nothing so my question is 01 4.0 sohc chain or belt. have u had any problems out of ur upper a arms after lifting? ok thanks.

more questions to follow
adam
 






Congrats. Nice looking truck that looks like it can handle itself out in the wilderness. :thumbsup:
 






nice sport trac you got there john
 






socal trac said:
alright im in the middle of lifting my truck and ive got the spindles made the shackles but my rear end is saggin how do i get it up? also im at about 90,000 miles and starting to worry about the timing belt or chain so i went to the parts house and they could find nothing so my question is 01 4.0 sohc chain or belt. have u had any problems out of ur upper a arms after lifting? ok thanks.

more questions to follow
adam
Adam, I am pretty sure that the 4.0 sohc engine uses chains. But my thread is not the best place to ask this question. Try doing a search first. If you can't find the results you are looking for then, try posting a question here: http://www.explorerforum.com/forums/forumdisplay.php?f=100

My rear is lifted up because I did a spring over axle conversion.
 






thats a really good lookin trac you got there weewee
 






Just read all the posts, they said about everything I wanted to say how about "Damn nice truck"!
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.











Back
Top