I am selling all my IFS parts making way for the big SAS!
I have most of the IFS taken out of the truck. Everything is for sale if anyone can use some of the parts to better their rig. I'll post some pictures of all the parts.
Main parts that I hope someone can use is the EBC brake rotors and brake pads. And the Timken bearing hubs that only have 20,000 miles on them. Also the Half Shafts have 20,000 miles on them as well. Knuckles are in perfect condition. Upper A-arm's are in good order and ball joints are good. Lowers have bad ball joints but if anyone needs them feel free to make an offer.
Parts for Sale:
Front EBC brake rotors and 6000 series pads - SOLD
Rotors GD7084 Is the rotor's part #
Pads DP61199 Is the Pad part #
Pads have 10/32nds of life left
Timken Bearing Hubs - $80 each. Shipped to your door. (Left one has 20,000 miles on it, Right has 18,000) - SOLD!
Energy Suspension front sway bar links - SOLD
Upper A-arm's - Make an offer
Lower control arms - Make an offer
Brake Dust shields - Make an offer
CV Half Shafts - SOLD
T-Bar plates - SOLD
T bar's - Make an offer
Knuckles - $25 a side
Brake pad/caliper mounts - Make an offer
T Bar skid plates - SOLD
T Bar adjusters - SOLD
Steering rack and tie rods - SOLD
Anything not sold will be given as scrap and get what i can from them that way. I would rather see it help someone on the forum.
P.S. The EBC brakes where the BEST thing I ever did with the rig. Stopped better with a trailer and 3 quads on the back then it did on its own before. Rear EBC pads will be used on new axle and front axle will have EBC pads on it as well.
I have most of the IFS taken out of the truck. Everything is for sale if anyone can use some of the parts to better their rig. I'll post some pictures of all the parts.
Main parts that I hope someone can use is the EBC brake rotors and brake pads. And the Timken bearing hubs that only have 20,000 miles on them. Also the Half Shafts have 20,000 miles on them as well. Knuckles are in perfect condition. Upper A-arm's are in good order and ball joints are good. Lowers have bad ball joints but if anyone needs them feel free to make an offer.
Parts for Sale:
Front EBC brake rotors and 6000 series pads - SOLD
Rotors GD7084 Is the rotor's part #
Pads DP61199 Is the Pad part #
Pads have 10/32nds of life left
Timken Bearing Hubs - $80 each. Shipped to your door. (Left one has 20,000 miles on it, Right has 18,000) - SOLD!
Energy Suspension front sway bar links - SOLD
Upper A-arm's - Make an offer
Lower control arms - Make an offer
Brake Dust shields - Make an offer
CV Half Shafts - SOLD
T-Bar plates - SOLD
T bar's - Make an offer
Knuckles - $25 a side
Brake pad/caliper mounts - Make an offer
T Bar skid plates - SOLD
T Bar adjusters - SOLD
Steering rack and tie rods - SOLD
Anything not sold will be given as scrap and get what i can from them that way. I would rather see it help someone on the forum.
P.S. The EBC brakes where the BEST thing I ever did with the rig. Stopped better with a trailer and 3 quads on the back then it did on its own before. Rear EBC pads will be used on new axle and front axle will have EBC pads on it as well.