Vacuum lines -- HELP! | Ford Explorer - Ford Ranger Forums - Serious Explorations

  • Register Today It's free! This box and some ads will disappear once registered!

Vacuum lines -- HELP!

pac1976

Member
Joined
June 29, 2004
Messages
12
Reaction score
0
City, State
Missouri
Year, Model & Trim Level
92 XLT 4x4
When replacing my PCV valve on my '92 today I broke a vacuum line. Long story short, there are 2 ver small diameter vacuum lines that are routed around the engine back by the firewall. I don't know which attachment goes to which opening on the vacuum tree. Any help would be appreciated.
 
<



boggs1227

Explorer Addict
Joined
February 19, 2008
Messages
1,472
Reaction score
4
City, State
Flowery Branch , Georgia, 1994 sport 2wd auto
Year, Model & Trim Level
2005 colorado 2wd 5spd
maybe those 2 are for the fpr (fuel pressure regulator) and one is for the heating and ac control system inside the truck.the large one thats attched to the top of the upper intake is i belive for the transmission modulater.

hope this helps.
 
<



MrShorty

Explorer Addict
Joined
December 27, 2001
Messages
5,078
Reaction score
16
City, State
Spanish Fork, UT
Year, Model & Trim Level
92 XLT and '87 Bronco II
I don't think it matters which port on the vacuum tree they hook up to. When I've had those molded plastic lines break, I've just replaced them with regular rubber vacuum tubing with the appropriate ID.
 
<



Top