-
Performance Upgrades - Maintenance - Modifications - Problem Solving - Off-Road - Street Trucks.
Covering the Explorer, ST, Sport, Lincoln Aviator, Sport Trac,
Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Aerostar.
Featuring H.I. - Human Intelligence.
Register Today It's free!
Water pump bolt size??? fixed. But leaking.
- Thread starter thunder92
- Start date
#1 On Race Day
Member
- Joined
- April 24, 2014
- Messages
- 16
- Reaction score
- 0
- City, State
- South Florida
- Year, Model & Trim Level
- 02 EXPLORER /'90 Mustang
Check out Dorman listed below;
Water Pump Stud Assort. Size 5/16"-24, M8-1.25, M6-1.0
Water Pump Stud Assort. Size 5/16"-24, M8-1.25, M6-1.0
thunder92
Active Member
- Joined
- July 10, 2008
- Messages
- 64
- Reaction score
- 0
- Year, Model & Trim Level
- 2002 4.0 4x4
got it
Ok, I went to autozone and bought a m6-1.05x25mm hex head screw. Looks to be the same size but the thread pattern is different. Snugged it right up!
Unfortunetely it still leaked! Not the bolts fault though. I've reinstalled this pump 2 times and both times got a leak out of it. This time I put gasket maker all over the gasket and mated it to the engine. Crossing my fingers it works tonight. Giving it the 24hr dry time for sure. I'm starting to forget how the car even drives
Ok, I went to autozone and bought a m6-1.05x25mm hex head screw. Looks to be the same size but the thread pattern is different. Snugged it right up!
Unfortunetely it still leaked! Not the bolts fault though. I've reinstalled this pump 2 times and both times got a leak out of it. This time I put gasket maker all over the gasket and mated it to the engine. Crossing my fingers it works tonight. Giving it the 24hr dry time for sure. I'm starting to forget how the car even drives
Featured images
Featured images
