Hello Forum Members: I wanted to share my experience with UPR Products and their Ecoboost catch can that I had installed this week. I was looking for a system that was high quality, plug & play, and easily returnable to stock. The UPR system does all three. I purchased three items to complete the kit: the catch can system itself (part # 5030-158-1), the inline check-valve (part # 5044-03), and the crankcase breather kit (part # 5013-01). I had done lots of research online, liked their system the best, and unbelievably discovered their shop is in my county. I called them, let them know what I had (2016 xSport) and they said, "why don't you come on down, and we'll build one for you right here on the spot". I did. After hanging with the guys for a bit and chatting Ecoboost, performance, etc, they said, what the hell, we want to add some photos for our online how-to section, and we need to get out of the office. Next thing I know the owner and two of his staff had my hood up and were building hoses and putting the system in. Without the step by step photos for their online how-to, this would have taken 10 minutes. The most stand out thing about their kits is the quality. Continental hoses, OEM fittings (no cutting your stock hose and re-using your OEM fittings), billet anodized check valve, and billet breather kit (see photos). To return to stock, all I have to do is unclip the kit, unbolt the catch can, and re-install my factory dirty side OEM PCV line- 5 minutes and done. I can't speak highly enough about this shop, the guys running it, and the factory look post installation. Check out the photos below. I added these to the forum media gallery, hopefully the short photo descriptions show up on your end as well. Hope ya'll get something out of this and helps you with your decision if you decide to install an OCC yourself. Cheers.
Here is a link to their website:
http://www.uprproducts.com/ford-ecoboost.html
Here is another link for one of their installation videos (this video is for the F-150, but it gives you an idea of the look and quality of their kits):
View attachment 97482
Owner of UPR products going above and beyond by installing their system on the spot.
View attachment 97483
Factory PCV line, left intact as UPR uses OEM fittings on all of their lines making it completely plug & play.
View attachment 97484
UPR line- note the high quality Continental hose
View attachment 97485
UPR custom check valve
View attachment 97486
UPR catch can assembly
View attachment 97487
Wide open throttle fitting custom fit on to my Livernois intake tube
View attachment 97488
Catch can installed, passenger side firewall using existing bolt location
View attachment 97489
UPR breather kit with built in check valve