rtamjbp
Member
- Joined
- March 31, 2014
- Messages
- 14
- Reaction score
- 0
- City, State
- pennsylvania
- Year, Model & Trim Level
- 2004 explorer xlt
A few weeks ago i noticed that the wheels were getting "stuck" while reversing out of a parking spot... also happened while turning slowly into or out of a parking spot in D. Assuming it was the TC motor we removed the 4x4 fuses 17 & 18 until we could replace the motor. After replacing the motor and the fuses we drove normally for a day until it started again. Yesterday we had our first snow of the winter so we replaced the fuses to take advantage of whatever 4x4 we had avail and it seemed to be stuck in 4x4 high and would not go into 4x4 low at all. Would this mean that it was my Control module all along? If so i would have to replace the PCM so I'm hoping there will be another option. Also I am concerned that I read on here that 17 &18 are both 20a fuses while my 18 is a 20 but my 17 is a 5a..... could this be the issue? I was also reading on here that there is a 3rd fuse for the 4x4?