railman
Well-Known Member
- Joined
- December 3, 2005
- Messages
- 122
- Reaction score
- 0
- City, State
- Madisonville, KY
- Year, Model & Trim Level
- 96 xlt Supercab
here is my front reciever/winch bumper project.....
trying to decide if i want to do "sheet" style bumper ends, or just do a couple tubes?
i will have a skid plate and 2 shackles mounted to it
the side plates are 3/8" thick plate and the reciever is mounted to 4" x 4" x 5/16" thick angle and a smaller angle iron to help support the cradle so as to not "flop" around excessively.
let me know what ya think
with the winch in place
from the side
and one of the truck
l8r, John
trying to decide if i want to do "sheet" style bumper ends, or just do a couple tubes?
i will have a skid plate and 2 shackles mounted to it
the side plates are 3/8" thick plate and the reciever is mounted to 4" x 4" x 5/16" thick angle and a smaller angle iron to help support the cradle so as to not "flop" around excessively.
let me know what ya think
with the winch in place
from the side
and one of the truck
l8r, John
