norvin
Member
- Joined
- September 18, 2004
- Messages
- 15
- Reaction score
- 0
- City, State
- Montreal Quebec Canada
- Year, Model & Trim Level
- 91 XL
hey all, my 91' which i dearly love had a head gasket failure - due to overheating ! wow, gasket kits for the 4.0l aint cheap !
meanwhile because it's SO DAMNED COLD up here, i've picked up a 94' pretty cheap as a "driver" until it gets warm enough to get under the hood of the 91'
As luck would have it, the wiper motor on the driver needs replaced. I've got the nuts/bolts and wiring removed, but before i start pulling on the motor, i'm just curious if there's anything else holding the assmebly together, is there a clip on the motor shaft holding it into the wiper arm assembly ? anyone please?
thanks...-15 below and dropping.
marc
meanwhile because it's SO DAMNED COLD up here, i've picked up a 94' pretty cheap as a "driver" until it gets warm enough to get under the hood of the 91'
As luck would have it, the wiper motor on the driver needs replaced. I've got the nuts/bolts and wiring removed, but before i start pulling on the motor, i'm just curious if there's anything else holding the assmebly together, is there a clip on the motor shaft holding it into the wiper arm assembly ? anyone please?
thanks...-15 below and dropping.
marc
