BigPip
Active Member
- Joined
- September 10, 2011
- Messages
- 85
- Reaction score
- 1
- City, State
- Central Florida
- Year, Model & Trim Level
- 98 Explorer
Today I finally replaced the intake gaskets on my truck! But I still have the issue of it bogging down when in WOT. the only codes I have been getting were bank 1 & 2 lean. I will find out tomorrow if I still get those codes and see if I still have a hard start issue.
What else could be giving me the WOT bogging issue? I was trying to read the TPS but my CAN diagnostic tool doesn't tell me the volts, only 20% at idle and 98% WOT. It will run like a beast at 3/4 throttle but just a little more and the power dies out.
What else could be giving me the WOT bogging issue? I was trying to read the TPS but my CAN diagnostic tool doesn't tell me the volts, only 20% at idle and 98% WOT. It will run like a beast at 3/4 throttle but just a little more and the power dies out.