Nightcrew
Active Member
- Joined
- August 17, 2013
- Messages
- 72
- Reaction score
- 0
- Year, Model & Trim Level
- 2011 Explorer XLT
Bodybump, have you lowered yours yet? I think I'll 'borrow' your black edition emblem idea.
To anyone else who lowers it, I took it in for an alignment and the rear camber was way off at -2.5 degrees. They said there is no factory adjustment for it. After I got it home I found out there is. The hole in the upper arm where the bolt goes through for the knuckle is elongated to allow for adjustment. I put it all the way out and I'm taking it back to the shop tomorrow for fine tuning.
Sorry to bring up a semi dead thread... but once you pulled the upper arm bolt out what did the camber come back too?