DaaQ
Well-Known Member
- Joined
- August 9, 2015
- Messages
- 206
- Reaction score
- 25
- City, State
- South KY
- Year, Model & Trim Level
- 2003 Explorer XLT 4x4
High all I have a 3rd gen that had a BTF spacer/control arm lift and 2" body lift. I was wanting to ask if anyone knows if they are compatible with 4th gens. I have opportunity to get an 09 for the cost of towing basically.
My 3rd gen had a good sized tree limb fall across the front of it so it's a good deal of work needed to repair it. Whereas the 09 needs the motor replaced.
Now I'm pretty sure the 3rd n 4th gens are basically the same from the frame down but was wanting to get some assurances or input.
I had put alot of work into my 3rd gens underside about 6 months prior to the tree incident.
Thanks in advance DaaQ.
My 3rd gen had a good sized tree limb fall across the front of it so it's a good deal of work needed to repair it. Whereas the 09 needs the motor replaced.
Now I'm pretty sure the 3rd n 4th gens are basically the same from the frame down but was wanting to get some assurances or input.
I had put alot of work into my 3rd gens underside about 6 months prior to the tree incident.
Thanks in advance DaaQ.