Easiest way to install cam on a 97 5.0

[Nate_V8]

I was thinking loosen the motor mounts, D/C the driveshaft and drop the tranny tail and jack up the front end so it can tilt back farther?

I know the rad support is in the way for a straight pull out. any other ways?

 

[section525]

I loosened the body mounts and raised the body.

But I already had a 3" BL on it so those were free inches.

I'll look through my pics and see if I can see any good angles.

 

[section525]

You'd have to raise it pretty high. You'd almost have to raise the tranny up to get the motor pointed down in front in your situation.

 

[Nate_V8]

LOL just a bit eh? haha, so far I'm going with my idea....but want to know if it works first. Somebody here has to have installed a cam on their expy

 

[Turdle]

I pulled out the engine and stuck in another with a bumpstick.

 

[Nate_V8]

I pulled out the engine and stuck in another with a bumpstick.

Hmmm just cherry picked it?

 

[Turdle]

Yes.