dmac0923
Well-Known Member
- Joined
- August 10, 2006
- Messages
- 267
- Reaction score
- 0
- City, State
- Yorktown
- Year, Model & Trim Level
- 2002 ranger xlt
Hello all, im new to this forum with the recent addition of my 2002 ranger XLT.
ive reseached the many problems with explorer 4wd's including the transfer case motor rebuild post but they dont seem to hit on the rangers too often.
like i said its a 2002 ford ranger xlt 4wd.
on the dash it has the knob you turn to select 2wd 4h or 4L but the truck is currently stuck in 2wd...when i turn the knob to select either 4H or 4L, nothing happens. No clunk under the car, no dash lights, and no relay clickin inside the car.
also im not sure if this matters but when i first start the truck and all the gauges and idiot lights go through their checks....the 4wd lights dont light up.
Where is the processor board located in the rangers? i learned that there supposedly is a white button you can push on the processor to determine if the board is bad or good.
i found the processor in my 95 explorer in the trunk area by the washer bottle and jack.
thanks in advance
ive reseached the many problems with explorer 4wd's including the transfer case motor rebuild post but they dont seem to hit on the rangers too often.
like i said its a 2002 ford ranger xlt 4wd.
on the dash it has the knob you turn to select 2wd 4h or 4L but the truck is currently stuck in 2wd...when i turn the knob to select either 4H or 4L, nothing happens. No clunk under the car, no dash lights, and no relay clickin inside the car.
also im not sure if this matters but when i first start the truck and all the gauges and idiot lights go through their checks....the 4wd lights dont light up.
Where is the processor board located in the rangers? i learned that there supposedly is a white button you can push on the processor to determine if the board is bad or good.
i found the processor in my 95 explorer in the trunk area by the washer bottle and jack.
thanks in advance
