U152fan4life
New Member
- Joined
- December 26, 2014
- Messages
- 1
- Reaction score
- 0
- City, State
- Garden City, MI
- Year, Model & Trim Level
- 2003 mountaineer
Looking for some local help in Garden City Michigan.
I am doing the servo bore o-ring replacement kit on my 02 Mountaineer.
I have everything back together but I can't get the damn snap rings back in their groove.
I have a case of beer for any experienced mechanics that have done this before.
I'm doing this in vehicle on jack stands and have decent tools but if you have any advice or help it is most appreciated. I have read through the posts and watched all the videos on youtube, I just can't get the snap rings back in.
PM me if you can help
I am doing the servo bore o-ring replacement kit on my 02 Mountaineer.
I have everything back together but I can't get the damn snap rings back in their groove.
I have a case of beer for any experienced mechanics that have done this before.
I'm doing this in vehicle on jack stands and have decent tools but if you have any advice or help it is most appreciated. I have read through the posts and watched all the videos on youtube, I just can't get the snap rings back in.
PM me if you can help