D M Dickson
New Member
- Joined
- May 20, 2007
- Messages
- 8
- Reaction score
- 0
- City, State
- N. Charleston South Carolina
- Year, Model & Trim Level
- 91 Explorer 2 WD
My blower quit working and I found a burnt fuse at the fuse panel. The fuse was not blown in the middle but it had melted to the fuse panel on the brn/org wire back to the blower motor, do I have a short in the wire or is the blower motor or resistor going bad? Changed the fuse and the blower is working again. Thx for any help.