MAS and Throttle body

[jrgaylor]

Except for extended radius arms I will shortly be done with my suspension mods and will be looking at doing some stuff to get more HP, I already have the flowmaster cat back exhaust. How much of a increase will I see if I added the KKM kit, 70 mm MAS, 66mm throttle body and a chip? and where is a good place to purchase these items?
Joe

 

[Alec]

I recommend getting the KKM directly from www.kustomz.com
the chip from Brian Apten, www.apten-us.com
MAS and TB from www.explorerexpress.com

With those 4 mods in addition to your exhaust you'll notice a fairly large pickup in power and maybe better mileage.

 

[Ronin8002]

I went from 155 HP stock to 185-190 HP (at the flywheel) with those mods. You can view my dyno sheet if you want at:

http://briefcase.yahoo.com/in_violentia_veritas

and go to the "Performance" folder. Keep in mind that the results on the dyno sheet are HP "at the wheels"...the numbers on it are lower because of drivetrain power loss....but you probably already knew that.

As to where you can get those mods....

KKM filter: www.kustomz.com

70mm MAS/66mm TB: www.truckperformance.com

Chip: www.apten-us.com (this place is great....I doubt you will get better customer assistance anywhere else)

Anyway, good luck

-James