spr
Well-Known Member
- Joined
- April 29, 2013
- Messages
- 109
- Reaction score
- 0
- Year, Model & Trim Level
- 2013 Expl XLT 4WD
Hi folks.
This is sort of a duplicate post - but I wanted to get it into the IVT forum and see if the Ford folks had any ideas here.
(Original thread here: http://www.explorerforum.com/forums/showthread.php?t=366843 )
Summary:
1) Go into MFT Keyless Entry settings.
2) Enter factory code to get in. OK.
3) Execute 'Delete all User codes' from the MFT keyless entry.
4) Trying to go back into MFT Keyless Entry settings by entering the factory code no longer works. Cannot get in.
Programming, and entry/unlocking from the outside keypad still works normally. Ability to manage it from MFT is what is broken.
There was a suggestion to recreate a 'user' code the same as the factory code to get MFT functional again - but that does not work, it seems.
Any comments or ideas appreciated. (well besides doing a 'master reset' that is... ;-) )
This is sort of a duplicate post - but I wanted to get it into the IVT forum and see if the Ford folks had any ideas here.
(Original thread here: http://www.explorerforum.com/forums/showthread.php?t=366843 )
Summary:
1) Go into MFT Keyless Entry settings.
2) Enter factory code to get in. OK.
3) Execute 'Delete all User codes' from the MFT keyless entry.
4) Trying to go back into MFT Keyless Entry settings by entering the factory code no longer works. Cannot get in.
Programming, and entry/unlocking from the outside keypad still works normally. Ability to manage it from MFT is what is broken.
There was a suggestion to recreate a 'user' code the same as the factory code to get MFT functional again - but that does not work, it seems.
Any comments or ideas appreciated. (well besides doing a 'master reset' that is... ;-) )