need driving light advice please

Greetings. I would like to add a nice set of driving lights to the Manik brush guard on my 95 XLT. The Manik has holes pre-drilled for lights. Any suggestions for a good but still resonable priced set of lights? I would like to avoid the large round lights that scream "off road"...something more subtle.

I don't have factory driving lights and hence do not have the factory dash plate with light rocker switch. I would like to see if I could purchase a factory dash plate from a recycling yard with the driving light switch to have the install look as factory as possible. Has anyone done this? Any problems with wiring??

Thanks for all of your help.

 

[Bill Kemp]

You can check out the KC 57 series. They are upgradeable to 100 watts for driving lights so they should be bright.
I wire my driving lights to come on only w/high beams so the location of the switch can be "out of the way" if you want since it is rarely used.
http://www.kchilites.com/matrix_57_series.html

 

[aldive]

You should be able to get the factory light switch from http://www.fordpartsnetwork.com/ and simply cut a mounting "holr" in the factory trim in the factory location.

Good luck.....