monroe8
New Member
- Joined
- November 24, 2009
- Messages
- 4
- Reaction score
- 0
- Year, Model & Trim Level
- 1996 Ranger
Ok I have a 96 ranger 4x4 with a 4r55e. I just did the valve body rebuild. I installed the ford TSB's and superior correction kit. Didn't install the pressure riser or intermediate servo spring. Shifts again but lazily. This happens in all gears. It will shift but slow. Also When kicking down into a passing gear it will just rev up. It will not hook a gear. When I replaced the epc solenoid one of the shift and tcc solenoids popped out. What am I missing?
