Dan Smithwick
New Member
- Joined
- May 23, 2009
- Messages
- 8
- Reaction score
- 0
- City, State
- Eastford , CT
- Year, Model & Trim Level
- 94 XLT
Well I finally decided to change the radius arm bushings on my 94 . Really
not as bad as I had anticipated . I went with drilling out the rivets . The bushing on the drivers side was shot so a straight forward replacment . I was
surprised on the passenger side , once I got the bracket off the bushing
just fell apart . I am going to have to replace the bracket as well . The bushing hole is very egg shaped with a good size crack in the top of the hole .
I think this has been one of my problems for some time . I will be finishing it up tomorrow .
Just wanted to share this with those of you who maybe having a shimmy
and slight clunking sound .
not as bad as I had anticipated . I went with drilling out the rivets . The bushing on the drivers side was shot so a straight forward replacment . I was
surprised on the passenger side , once I got the bracket off the bushing
just fell apart . I am going to have to replace the bracket as well . The bushing hole is very egg shaped with a good size crack in the top of the hole .
I think this has been one of my problems for some time . I will be finishing it up tomorrow .
Just wanted to share this with those of you who maybe having a shimmy
and slight clunking sound .