curlej
Member
- Joined
- July 29, 2002
- Messages
- 12
- Reaction score
- 0
- City, State
- SF
- Year, Model & Trim Level
- '01 Sport Trac, '02 XLT
I recently had my '01 SportTrac tranny rebuilt because it would not engage in reverse. Now it slips in reverse in 2WD, especially when the truck has been driven a few miles, especially under load (like going uphill). No codes come up on the tranny. Trans place says there is a problem in the transfer case that might be causing it (transfer case won't engage in low range, but high range is fine). Could the transfer case problem affect the reverse, even when truck is in 2WD?
